Sany 215 Hydraulic Final Drive Motor

C0r - Static Load Rating:49.4 kN; Outside Diameter D:130.000 mm; Grease Reference Speed:6800 rpm; Clearance:C3; Radius Rs min:2.100 mm; Cr - Dynamic Load Rating:83.1 kN; Outside Ring Width B:31.000 mm; Bore Size d:50 mm; Weight:1.9 Kg; Oil Reference Speed:9700 rpm;

Max Grease Speed:2400; Bolt Qty:2; Material :Cast Iron; H2:45.0 mm; A1:120 mm; N:18 mm; Seal Type:Labyrinth; J1:70 mm; Shaft Diameter da:100 mm; C1 Dynamic Load Rating:815;

B:8.2500 in; Bolt Hole Length:0.75 in; Adapter Assembly Number1:SNW-10 x 1-5/8; Bolt Hole Width:0.500 in; A:2.50 in; H:4.75 in; C:2.3750 in; E Max.:7.0000 in; Full Timken Part Number:SAF225101-5/8; Housing Only2:SAF 510 x 1-5/8;

d:45.0000 mm; Bearing Insert Material:Nickel-Coated Steel; Shaft Attachment (2):D-Lock; Ball Grade:Class 24; Housing Coating:No Coating; Expansion Type:Non-Expansion; End Cap Groove:Yes; Housing Material:Polymer; Grease Type:Mobilgrease FM222; Seal Type:Triple Lip;

Cone Part Number:1975; B:19.053 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:10900 lbf; Cage Type:Stamped Steel; B - Cone Width:19.355 mm; Series:1900; Aa - Cage-Cone Backface Clearance:0 mm; da - Cone Frontface Backing Diameter:29.46 mm; Ab - Cage-Cone Frontface Clearance:2 mm; r - Cup B

Da - Cup Frontface Backing Diameter:7.41 in; Design Units:Imperial; r - Cup Frontface To Clear Radius2:0.090 in; C - Double Cup Width:3.1581 in; K - Factor3:0.92; Y1 - ISO Factor5:1.07; e - ISO Factor4:0.63; Y - ISO Factor1:0.95; Cg - Geometry Factor7:0.12; Series:98000;

Flinger Material:Steel; Bearing Series:206 Series; Ball Bearing Housing Series:206 Series; Bearing Locking Device:Tapered Adapter Slee; Shaft Attachment (2):Grip Tight; Max Bearing Speed:11000 rpm; Retainer Type:Std Retainer; Bearing Family:Grip Tight Ball Bear; Retainer Material:Nylon; d:1.2500 in;