Schaeff HR32 Hydraulic Final Drive Motor

Dimension H :3-1/4 in; Housing Width:4.0 in; Dimension J2 :8-5/8 in; Series Type:Light Series; Shaft Size:2-3/16 in; Dimension K :1-7/8 in; Note:This product line wa; Bearing UPC:013992025784; Cor - Static Load Rating:25848 lbf; Seal Type:Felt Type;

T min.:-20 °C; E:10 mm; N:M8; Designation of housing:PAE203N-; d:12 mm; C:9.55 kN; s1:11 mm; Z:15.9 mm; Designation of bearing:US201G2T20; H:30.2 mm;

T - Bearing Width across Cones:1.5000 in; R - Cone Backface To Clear Radius1:0.06 in; Y2 - ISO Factor10:2.9; d:1.5 in; K - Factor7:1.69; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:0.08 in; db - Cone Backface Backing Diameter:1.77 in; C90 - Dynamic Radial Rating (One-Row, 90 million

D:21.5000 in; Y1 - ISO Factor5:2.03; r - Cup Frontface To Clear Radius2:0.130 in; Design Units:Imperial; Series:970000; Y - ISO Factor1:1.8; Cg - Geometry Factor7:0.173; e - ISO Factor4:0.33; C - Double Cup Width:6.0000 in; K - Factor3:1.76;

Base to Center Height:Not Applicable; Ship Weight:1.75 LB; Bearing Outer Ring Material:Steel; Bearing Inner Ring Material:Steel; Retainer Material:Nylon; Grease Type:Unirex N2; Retainer Type:Std Retainer; Seal Type:Single Lip; UPC:782475822423; Ring Size:Standard;

G:M6x1; A:32 mm; L1:61 mm; H1:76 mm; T max.:100 °C; S:17 mm; B1:43.5 mm; Designation of housing:T204-; T min.:-40 °C; SW:3 mm;

Designation of housing:C315-; A3:4 mm; Weight:7.49 kg; C0:76.8 kN; H:190 mm; G:M10x1; B:82 mm; SW:6.35 mm; d:74.61 mm; T min.:-40 °C;

s1:27.8 mm; d:55.56 mm; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:18.7 Nm; S:22.2 mm; C:34 kN; Designation of bearing:SUC211-35; Weight:1.06 kg; C0:25.5 kN;

D:920.000 mm; UPC Code:087796198913; B - Outer Ring Width:336.000 mm; da - Inner Ring Backing Diameter:585.000 mm; r - Outer Ring To Clear Radius2:6.000 mm; Da - Outer Ring Backing Diameter:824.000 mm; Reference Thermal Speed Rating (Oil)7:260; Reference Thermal Speed Rating (Grease):250; e - ISO Fa

Maximum Capacity / Filling Slot:No; Weight / LBS:4.9604; ra max:2 mm; Cage Material:Steel; Radial clearance class:C2; Dynamic load, C:96 kN; Minimum Buy Quantity:N/A; Manufacturer Name:NTN; Inch - Metric:Metric;

d1:51.1 mm; SW:3.97 mm; G:R1/8"; d:33.34 mm; S:18.8 mm; Designation of housing:SP206-207/72-; Weight:2.14 kg; C:25.7 kN; L1:225 mm; T min.:-20 °C;